Anonymous Call - Yealink SIP-T48G User Manual

User Guide for the SIP-T48G IP Phone
You can also configure a line key as a group pickup key via phone user interface or web
user interface. You can pick up a call by tapping the group pickup key directly.
Note The directed call pickup code and group call pickup code are predefined on the system
server. Contact your system administrator for more information.
You can use anonymous call to block the identity and phone number from showing up to
the called party when you call someone. For example, you want to call to consult some
of the services, but don't want to be harassed. Anonymous call is configurable on a
per-line basis. You can also configure the phone to send anonymous code to the server
to activate/deactivate anonymous call on the server side.
Note
Anonymous call is not available on all servers. Contact your system administrator for the
anonymous call on code and off code.
To configure anonymous call via phone user interface:
1. Tap ->Call Features->Anonymous.
2. Tap the desired line.
3. Tap the On radio box of the Local Anonymous field.
4. (Optional.) Tap the On Code or Off Code radio box of the Send Anonymous Code
field.
5. (Optional.) Enter the anonymous call on code in the On Code field.
6. (Optional.) Enter the anonymous call off code in the Off Code field.
7. Tap the Save soft key to accept the change or
Anonymous call is configurable via web user interface at the path Account->Basic.
122
to cancel.