Hotline - Yealink SIP-T48G User Manual

User Guide for the SIP-T48G IP Phone
3. Enter the desired delay time in the Inter Digit Time (1~14s) field.
The default delay time is 4s.
4. Click Confirm to accept the change.
Note
Live dialpad is configurable via web user interface only.
You can dial a hotline number immediately upon lifting the handset, pressing the
speakerphone key or tapping the line key. You can also configure a delay, where the
phone will dial out the hotline number automatically after the specified period of time.
To configure the hotline number via phone user interface:
1. Tap ->Call Features-> Hotline.
2. Enter the desired number in the Number field.
3. Enter the desired delay time in the Hotline Delay 0-10(s) field.
4. Tap the Save soft key to accept the change or
84
to cancel.