Headset Prior - Yealink SIP-T48G User Manual

User Guide for the SIP-T48G IP Phone
using the headset to place a call, refer to
To deactivate the headset mode:
1. Press
The HEADSET key LED goes out, and the icon
when the headset mode is deactivated.
You can use headset in priority when enabling headset prior. This feature is especially
useful for permanent or full-time headset users.
To enable headset prior via web user interface:
1. Click on Features->General Information.
2. Select Enabled from the pull-down list of Headset Prior.
3. Click Confirm to accept the change.
To use headset prior, you should activate the headset mode in advance:
1. Physically connect the headset.
2. Press
Note
If headset prior is enabled, the headset mode will not be deactivated until you press the
HEADSET key again.
Headset prior is configurable via web user interface only.
60
again on the phone.
to activate the headset mode.
Placing Calls on page 88.
disappears from the touch screen