Pnp/Pci Configurations - Advantech ARK-3381 User Manual

Instant-Off
Delay 4 Sec
• Wakeup By PCI Card [Press Enter]
This item allows the user to select wake up by PCI Device.
• Power On By Ring [Disabled]
This item allows the user to enable system resume by modem ring. Sys-
tem default is set to "Disabled".
• Resume By Alarm [Disabled]
This item allows the user to enable and key in Date/time to power on
system.
Disabled
Enabled
Date (of month)
Resume Time (HH:MM:SS) Alarm(0-23) : (0-59) : 0-59)
• PWRON After PWR-Fail [Off]
This item allows the user to select power fail function. The functions
depend on chipset design.

4.2.7 PnP/PCI Configurations

Note: This "PnP/PCI Configurations" screen is for setting up the IRQ
and DMA (both PnP and PCI) bus assignments.
• Reset Configuration Data [Disabled]
This item allows the user to clear any PnP configuration data stored in
the BIOS.
• Resources Controlled By [Auto (ESCD)]
- IRQ Resources
This item allows the user to assign interrupt types to IRQ-3, 4, 5, 7, 9,
10, 11, 12, 14, and 15, respectively.
• PCI / VGA Palette Snoop [Disabled]
The item is designed to solve problems caused by some non-standard
VGA cards. A built-in VGA system does not need this function.
ARK-3381 User Manual
Press power button then Power off instantly.
Press power button 4 sec. to Power off.
Disable this function.
Enable alarm function to power on system
Alarm 1-31
52