Table of Contents
Advertisement
4.2.10 Set Password
Note: To enable this feature, first go to the Advanced BIOS Features
menu, choose the Security Option, and select either Setup or System,
depending on which aspect you want password protected. Setup requires
a password only to enter Setup. System requires the password either to
enter Setup or to boot the system. A password may be at most 8 charac-
ters long.
To Establish Password
1.
Choose the Set Password option from the CMOS Setup Utility
main menu and press <Enter>.
2.
When you see "Enter Password", enter the desired password and
press <Enter>.
3.
At the "Confirm Password" prompt, retype the desired password,
then press <Enter>.
4.
Select Save to CMOS and EXIT, type <Y>, then <Enter>.
To Change Password
1.
Choose the Set Password option from the CMOS Setup Utility
main menu and press <Enter>.
2.
When you see "Enter Password", enter the existing password and
press <Enter>.
3.
You will see "Confirm Password". Type it again, and press
<Enter>.
4.
Select Set Password again, and at the "Enter Password" prompt,
enter the new password and press <Enter>.
5.
At the "Confirm Password" prompt, retype the new password, and
press <Enter>.
6.
Select Save to CMOS and EXIT, type <Y>, then <Enter>.
ARK-3381 User Manual
54
Advertisement
Table of Contents
