1.8.2
CMOS Clear (CMOS1)
The AIMB-582 motherboard contains a jumper that can erase CMOS data and reset
the system BIOS information. Normally this jumper should be set with pins 1-2
closed. If you want to reset the CMOS data, set CMOS1 to 2-3 closed for just a few
seconds, and then move the jumper back to 1-2 closed. This procedure will reset the
CMOS to its default setting.
Table 1.3: CMOS1
Function
*Keep CMOS data
Clear CMOS data
* Default
1.8.3
JLVDS1-2: LCD Power 3.3 V/ 5 V/ 12 V Selector
Table 1.4: JLVDS1-2: LCD Power 3.3 V/5 V/ 12 V Selector
Closed Pins
JLVDS2, 1-2
JLVDS2, 2-3
JLVDS1, 2
JLVDS2, 2
Default
*
Jumper Setting
1-2 closed
2-3 closed
Result
Jumper for +3.3 V
Jumper for +V5
Jumper for +12 V
9
AIMB-582 User Manual