Front Panel Connectors (Jfp1/Jfp2/Jfp3); Atx Soft Power Switch ((Jfp1/Pwr_Sw)); Reset (Jfp1/Reset); Hdd Led (Jfp1/Hddled) - Advantech AIMB-582 User Manual

2.10

Front Panel Connectors (JFP1/JFP2/JFP3)

There are several headers for monitoring and controlling the AIMB-582.
2.10.1

ATX soft power switch ((JFP1/PWR_SW))

If your computer case is equipped with an ATX power supply, you should connect the
power on/off button on your computer case to ((JFP1/ PWR_SW)), for convenient
power on and off.
2.10.2

Reset (JFP1/RESET)

Many computer cases offer the convenience of a reset button. Connect the wire for
the reset button.
2.10.3

HDD LED (JFP1/HDDLED)

You can connect an LED to connector (JFP2/HDDLED) to indicate when the HDD is
active.
2.10.4

External speaker (JFP1/SPEAKER)

JFP1/SPEAKER is a 4-pin connector for an external speaker. If there is no external
speaker, the AIMB-582 provides an onboard buzzer as an alternative. To enable the
buzzer, set pins 7 & 10 as closed.
21 AIMB-582 User Manual