Jumpers And Connectors; Table 1.1: Jumpers; Table 1.2: Connectors - Advantech AIMB-582 User Manual

 Power supply voltage: +3.3 V, +5 V, +12 V, -12 V, 5 Vsb
 Power consumption:
Intel LGA1155 Core i7 3770 3.4GHz, 8MB L3 Cache, 4pcs 8GB DDR3
1600MHz memory
+5 V
2.69 A
Measure the maximum current value which system under maximum load (CPU:
Top speed, RAM & Graphic: Full loading)
 Board size: 240 mm x 240 mm (9.6" x 9.6")
Board weight: 0.365 kg

1.4

Jumpers and Connectors

Connectors on the AIMB-582 motherboard link it to devices such as hard disk drives
and a keyboard. In addition, the board has a number of jumpers used to configure
your system for your application.
The tables below list the function of each of the board jumpers and connectors. Later
sections in this chapter give instructions on setting jumpers. Chapter 2 gives instruc-
tions for connecting external devices to your motherboard.

Table 1.1: Jumpers

Label
JFP1
JFP2
CMOS1
PSON1
JWDT1+JOBS1
JCASE1
JLVDS1
JLVDS_CLT1
JEME1
JMECLR1
JUSBPWR1
JUSBPWR2
JUSBPWR3
JUSBPWR4

Table 1.2: Connectors

Label
LPT1
LVDS1
INV1
COM3456
USB45
USB89
AIMB-582 User Manual
3.3 V 12 V
0.93 A 5.3 A
Function
Power switch/HDD LED/SMBus/Speaker
Power LED and Keyboard lock
CMOS clear (Default 1-2)
AT(1-2) / ATX(2-3) (Default 2-3)
Watchdog Reset and OBS Alarm
Case Open pin header
Voltage 3.3 V/5 V/12 V selector for LVDS1 connector
(Default 1-2, 3.3 V)
Brightness control selector for Analog or Digital
(Default 1-2, Analog)
Intel AMT Disable Jumper
Clear AMT setting
USB port 0-1 power source switch between +5 Vsb and +5 V
USB port 2-3 power source switch between +5 Vsb and +5 V
USB port 4/5/8/9 power source switch between +5 Vsb and +5 V
USB port 10/11/12/13 power source switch between +5 Vsb and +5
V
Function
Parallel port, supports SPP/EPP/ECP mode
LVDS1 connector
LVDS1 inverter connector
Serials port connector (RS-232)
USB port 4, 5 (on board)
USB port 8, 9 (on board)
5 Vsb -12 V
0.0 A 0.52 A
4