Open A Sent Message; Send To Another Destination - Aastra DT690 User Manual

The first character entered will be an upper level character followed by
lower level characters unless the
character.
When pressing a key, the first available character on that specific key is
displayed. To get any of the other characters on that key, press the key
until that character appears in the display. For example, to the character E,
press 3 twice. E appears in the display and is selected after a time out or
when another key is pressed.
Note:
14.3.1

Open a sent Message

To open a sent message, do the following:
14.3.2

Send to another destination

To send a message to another destination, do the following:
1424_EN_LZT103088 Rev B1 2009-05-20
The maximum message length is 160 characters (Keys 0-9, *
Note:
or # can be used. Keys 0 and 1 contains special characters,
see to see all characters). Some characters require 2 bytes in
the final message, therefore the user will sometimes not be
able to enter 160 characters.
4. Enter a number, or press middle soft key to enter your contact list,
and press Send to send the message.
To delete a character, press Clear.
1. Press Menu, select Messaging, and press Select.
2. Select Sent, and press Select.
3. Selext a message, ansd press Select.
1. Press Menu, select Messaging, and press Select.
2. Select Inbox or Sent, and press Select.
3. Select a message, and press View.
4. Press More, select Forward, and press Select.
5. Edit the message if wanted, and press Send.
6. Enter a number, and press Send.
is pressed before entering the
© Copyright Aastra Telecom Sweden, 2009.
All rights reserved.
77