14
Messages
When receiving a message, the indicator starts flashing, accompanied by a
message tone or beep or vibrating alert. If a message is received during a
call, a beep notifies the user. The new message icon
display. The icon will remain in the display until all new messages are
opened.
There are three types of messages:
14.1
Manual Message Waiting (MMW)
If a called extension does not answer it is possible to initiate a message
waiting indication on that extension (if this function is allowed). If there is a
message waiting, you will hear a special dial tone, and you will see a dialog
window in the display.
14.1.1
Answering Manual Message Waiting
To answer a manual message waiting:
From the dialog message New voice mail message(s). View now? do the
following:
14.1.2
Order Manual Message Waiting to Another Extension
In idle mode, do the following:
1424_EN_LZT103088 Rev B1 2009-05-20
•
Manual Message Waiting (MMW), see Section 14.1.
•
Text Messages, see Section 14.2.
•
Voice Mail, see Section 14.4.
1. Press Yes to open the mail inbox (or press No to check the
message later). The icon
have a new voice mail message. Call to listen to the message.
2. Press Call.
A call is initiated to the extension that requested the MMW.
1. Press *31* and enter the extension number.
2. Press # and
.
Wait for the call timer to start in the display.
3. Press
to finish the procedure.
The message is sent to the called extension.
and following message is shown: You
© Copyright Aastra Telecom Sweden, 2009.
All rights reserved.
is shown in the
73