Call Forwarding; Diversion From Call Services Menu - Aastra DT690 User Manual

Note:
OR
12

Call Forwarding

There are some different ways of forwarding calls. These are described in
the following sections.
12.1

Diversion from Call Services Menu

A soft key or a hot key can be pre-programmed with a short cut to the
Diversion function, see Section 9, or by setting the profile to divert
incoming calls. All calls to your extension are diverted to an internal or
external answering position of your choice.
All calls, calls when busy or calls at no answer can be diverted to other
phone numbers.
Note:
To divert calls to another phone number, do the following:
Also see Section 12.2 and Section 12.3.
1424_EN_LZT103088 Rev B1 2009-05-20
2. Dial the required digits.
Entered digits are transferred as DTMF signals.
In Finland, press 1 and dial the required digits.
1. Press More, select DTMF and press Select.
2. Dial the required digits.
Entered digits are transferred as DTMF signals.
This feature needs to be programmed in the WinPDM or CPDM.
Please contact your system administrator.
1. Press Menu, mark Calls, and press Select.
2. Step to Call services, and press Select.
3. Select Divert calls and press Select.
4. Select Internal or External, and press Select.
5. Select Activate and press Select.
6. Enter the number to divert your calls to and press OK.
Wait for the call timer to start in the display.
7. Press to finish the procedure.
© Copyright Aastra Telecom Sweden, 2009.
All rights reserved.
63