Replacing The Control Panel - HP Officejet LH 6000 Service Manual

Chapter 6
5. Unscrew the two thumbscrews on the power supply module and, using the handle, pull the
module from the power supply cage.
6. Slide the new power supply module into the power supply cage.
CAUTION
7. Tighten the two thumbscrews on the module.
8. Connect all telephone cables and power cords.
9. Turn on the HP NetServer and display.

Replacing the Control Panel

The control panel contains power, keyboard lock, and reset buttons, as well as the LCD and status LEDs.
NOTE
80
Thumbscrews
Removing the Power Supply Modules
Do not slam the power supply into the cage; insert it slowly, and push firmly only
when you feel resistance. Excessive force may damage connectors on the power
supply cage or the module.
The orientation of the control panel is different on the pedestal version and the rack-
mounted version.
Note: Pedestal version shown.
Rack version similar.
Power Supply
Modules
Replacing Parts