Table of Contents
Advertisement
Chapter 1
CAUTION
6. Pull the board out until it clears the chassis guides.
7. Slide the system board assembly from the chassis and place it metal plate side down on an
anti-static pad.
CAUTION
8
Removing the System Board Assembly
The system board assembly weighs approximately 20 lbs. (9 kgs.). Removing the
board assembly with the assistance of another person is advised.
Do not operate the HP NetServer for more than sixty minutes without first installing
all covers and the front bezel. Operating the system without all covers in place
reduces critical cooling airflow over some components, such as hard disk drives and
processors. Operating the system without all covers in place may result in failure of
these components.
General Information
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
