Table of Contents
Advertisement
Chapter 2
Depth
Weight
HP NetServer LH 6000r
Height
Width
Depth
Weight
Power Requirements
Power Supply Specifications: Three power supplies, plus one for redundancy
Power supply type
Input voltages:
Nominal:
Range:
Power availability:
Minimum System Requirements
Voltage
100
120
200
230
Switch Settings
The configuration switch, S1, is located on the lower left of the system board of the system board assembly.
To change the switch settings, it is recommended that the system board assembly be removed from the
chassis.
NOTE
28
724.2 mm (28.5 in)
72.6 – 78.5 kg (160 - 173 lb.)
354.7 mm (14 in)
482.6 mm (19 in)
749.2 mm (29.5 in)
72.6 – 78.5 kg (160 - 173 lb.)
Volt/Amps
1177
1153
1120
1117
Only the first four switches set the processor speed. Do not change the processor
speed switch settings.
Wide range, PFC
100 to 240 VAC, 11.7A/5.6 A at 50/60 Hz
90 to 264 VAC at 47 - 63 Hz
780 W continuous
Amps
11.7
9.6
5.6
4.9
System Information
Watts
1166
1141
1099
1095
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
