Software Interface - FALCOM NAVI-B-H User Manual

NAVI-B-H

2.1.1 Software interface

The NAVI-B-H evaluation receiver is capable of outputting data in the
NMEA-0183 format as defined by the National Marine Electronics
Association (NMEA), Standard for Interfacing Marine Electronic Devices,
Version 2.32, January 1, 1997.
2.1.1.1 NMEA output messages
The table below shows all NMEA output messages supported by NAVI-B-
H as well as a brief description of each output message.
For more detailed information about the output message list, please, refer to
the SiRFstarII
"service/downloads/manuals" on Falcom's Website
Option
GGA
GLL
GSA GPS receiver operating mode, satellites used in the position solution and DOP
GSV The number of GPS satellites in view satellite ID numbers, elevation, azimuth
RMC
VTG
Table 1:
Info: Please, note that all supported NMEA messages of the NAVI-B-H can
be activated/deactivated via the SiRFdemo software (See chapter
4.2.1) using the data-logger messages. The data-logger input messages
are issued in a separated document see [1]. All supported input
messages in this document are available for both JP7-T-H GPS
receiver and NAVI-B-H.
This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission.
message set specification
Time, position and fix type data.
Latitude, longitude, UTC time of position fix and status.
and SNR values.
Time, date, position, course and speed data.
Course and speed information relative to the ground.
NMEA Output Messages
available
www.falcom.de.
:
Description
values.
VERSION 1.00
in section
Page 10