FALCOM NAVI-B-H User Manual page 21

NAVI-B-H
3. First, you must turn on the enabled Bluetooth™ device (in our example
iPAQ 38xx Bluetooth™ device). Check the Blue Manager's icon on the
right-bottom screen. If the icon is grey i.e. the Bluetooth™ is turned off.
In order to turn the Bluetooth™ on, tab on the Bluetooth™ icon on
right-down corner of your Pocked PCs device display, a pop-up menu
will appear. Select Enable Bluetooth™ Ratio. The colour of the
Bluetooth™ icon will be changed from grey to blue-white (it depends on
the installed Bluetooth™ software), signifying that it is turned on.
4. Search for the FALCOM NAVI-B-H. Open the Bluetooth™ popup
menu on the right-bottom screen. Tab on the Bluetooth™ Manager.
5. If you have not searched for devices since last search, tap Search menu
at bottom (below right). After search is completed, a list of found
Bluetooth™ devices will appear on your screen. Check the FALCOM
NAVI-B-H found (below left) and tap Save. Then tab OK on the
following (below right) screen.
This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission.
VERSION 1.00
Page 21