Table of Contents
Advertisement
NAVI-S
3 Software interface
The NAVI-S evaluation receiver is capable of outputting data in the NMEA-
0183 format as defined by the National Marine Electronics Association
(NMEA), Standard for Interfacing Marine Electronic Devices, Version 2.20,
January 1, 1997.
3.1 NMEA output messages
The table below shows all NMEA output messages supported by NAVI-S as
well as a brief description of each output message.
For more detailed information about the output message list, please refer to
the
SiRFstarII
"service/downloads/manuals" on FALCOM's Website
Option
GGA
GLL
GSA
GPS receiver operating mode, satellites used in the position solution
GSV
The number of GPS satellites in view satellite ID numbers, elevation,
MSS
Signal-to-noise ratio, signal strength, frequency and bit rate from a
RMC
VTG
Table 4:
This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission.
message
set
specification
Time, position and fix type data.
Latitude, longitude, UTC time of position fix and status.
and DOP values.
azimuth and SNR values.
radio-beacon receiver.
Time, date, position, course and speed data.
Course and speed information relative to the ground.
NMEA Output Messages
available
www.falcom.de.
:
Description
VERSION 1.04
in
section
Page 10
Advertisement
Table of Contents
Need help?
Do you have a question about the NAVI-S and is the answer not in the manual?
Questions and answers