Installation Instruction; Installation Instruction Using Navi-S-1; Installation Instruction Using Navi-S-2 - FALCOM NAVI-S User Manual

NAVI-S

4 Installation instruction

4.1 Installation instruction using NAVI-S-1

Choose the best suitable location for mounting the NAVI-S-1. It should be
mounted in a horizontal or near-horizontal position. There should be a clear
horizon-round view from the mounting position, i.e. the NAVI-S-1 should
not be mounted beside objects which block part of the view. The NAVI-S-1
is designed for mounting on a sheet-metal structure. The bottom side of the
NAVI-S-1 has a magnetic base, which should be attached only to a metal
sheet.
Hints
♦
The receiving side of the antenna head is on the top of NAVI-S-1.
♦
The device has to be installed inside the vehicle.
♦
NAVI-S-1 is not water resistant. Do not contact it with water.
♦
The adhesive pad included in the delivery packing is to be stuck on
the bottom side of NAVI-S-1 in case of installing on the non-
metallic parts.

4.2 Installation instruction using NAVI-S-2

a) Use the enclosed cleaning cloth, clean the side of the part, where
the receiver is supposed to be installed.
b) Do not forget, the receiving side of the antenna head is on the
bottom of NAVI-S-2
c) There is an adhesive pad at the bottom side of the receiver.
Remove the protecting sheet (yellow sticker) from the adhesive
pad.
d) Place the adhesive pad onto cleaned area and press the other side of
the NAVI-S-2 to avoid air bubbles.
Hints
♦
The receiving side of the antenna is on the bottom side of the
NAVI-S-2.
♦
Proper functionality requires on-glass-mounting
♦
Does not install the device on metallic or coated windows
♦
To be installed in-door on the immovable parts.
♦
NAVI-S-2 is not water resistant. Do not contact it with water.
This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission.
VERSION 1.04
Page 11