Table of Contents
Advertisement
NAVI-S
Step 3:
After the user has connected the NAVI-S to the controlled device,
he has to choose the correct COM port number and baud rate for
running the map or navigation software.
Step 4:
Run the evaluation program. Please refer to chapter 7 "How to
evaluate the NAVI-S".
Notice:
(1)
For safety reason, please do not install NAVI-S while driving.
(2)
Please set-up the COM port connected with NAVI-S to:
Baud rate : 38400
Data bit : 8
Parity : None
Stop bit : 1
Flow control : None.
(3)
The formats of NMEA messages are available under the
following internet address:
www.falcom.de/service/downloads/manual/SiRF/SiRFmessages.pdf
This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission.
SiRFdemo or a Map software which supports the
standard NMEA protocols.
VERSION 1.04
Page 13
Advertisement
Table of Contents
Need help?
Do you have a question about the NAVI-S and is the answer not in the manual?
Questions and answers