NAVI-S
2 Technical specifications
2.1 Electrical Characteristics
2.1.1 General
Frequency
C/A code
Channels
2.1.2 Accuracy
Position
Velocity
Time
2.1.3 DGPS Accuracy
Position
Velocity
2.1.4 Datum
WGS-84
2.1.5 Acquisition Rate
Snap start
Hot start
Warm start
Cold start
2.1.6 Dynamic Conditions
Altitude
Velocity
Acceleration
Jerk
2.1.7 Default settings
RX/TX:
2.1.8 DC Power
Main power
-
♦ NAVI-S-1(-2)
This confidential document is the property of FALCOM GmbH and may not be copied or circulated without permission.
L1, 1575.42 MHz
1.023 MHz chip rate
12
10 meters CEP without SA
0.1 meters/second, without SA
1 microsecond synchronized to GPS time
1 to 5 meters, typical
0.05 meters/second, typical
< 3 sec., average
< 8 sec., average
< 38 sec., average
< 45 sec., average
18,000 meters (60,000 feet) max.
< 515 meters/second (1000 knots) max.
4 g, max.
20 meters/second³, max.
NMEA 38400 baud,
Msg.: GLL, GGA, RMC, VTG, GSV, GSA
8 data bits, no parity, 1 stop bit
: +5V DC ± 5%, 65mA (continuous
mode), typical
VERSION 1.04
Page 8
Need help?
Do you have a question about the NAVI-S and is the answer not in the manual?
Questions and answers