IP Camera User Manual
4.3 Network Setup
4.3.1 IP Address Setup
Sets the IP address, subnet mask, and gateway of the local network that the device is connected to. If the local network supports DHCP, the
device can be set to DHCP mode and the network will assign an IP address to the device. The device is set to DHCP mode by default.
4.3.2 DNS
The DNS server addresses can be set up here. This does not have to be set up when using DHCP.
4.3.3 DDNS Client
The device can be connected to Speco's DDNS server so that it can have a host name.
18