Table of Contents
Advertisement
Chapter 2 Preparations
1.21.1
Installation
Install a Hard Disk Drive by using the following procedure. Follow the same installation procedure for other
slots.
Refer to Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
1.
2.
Locate the slot where you install the Hard Disk Drive.
The server provides 12 slots. Install Hard Disk Drives in ascending port number order.
3.
Remove the dummy trays.
4.
Unlock the handle of the drive carrier.
110
Note
Use hard disk drives specified by NEC. Installing a third-party hard disk drive
might cause a failure of the server and it.
• Keep the dummy trays for future use.
Note
• Dummy trays are intended to increase the cooling effect inside the server. Keep
the dummy trays installed in slots where Hard Disk Drives are not installed.
Express5800/R120d-2E User's Guide
1. Installing Internal Optional Devices
Advertisement
Table of Contents
