Table of Contents
Advertisement
Chapter 1 General Description
•
LINK/ACT LED (
This LED indicates the state of the standard network port. LINK LED lights green when the server and hub
are powered and properly connected. ACT LED flashes green when the network port is transmitting or
receiving data.
If the LED does not turn on in LINK state,
LINK/ACT LED pattern
On (green)
Flashing (green)
Off
•
SPEED LED (
This LED indicates which network interface is used.
The four LAN connectors for data transmission support 1000BASE-T, 100BASE-TX, and 10BASE-T.
Management LAN port supports 100BASE-TX and 10BASE-T.
On (amber)
On (green)
Off
46
1,
2,
3,
4,
1,
2,
3,
4,
M)
SPEED LED pattern
Express5800/R120d-2E User's Guide
M)
Explanation
The server and hub are powered and properly connected
The network port is transmitting or receiving data.
Check the cable or connection
Explanation
Operating with 1000BASE-T
Operating with 100BASE-TX
Operating with 10BASE-T
4. Names and Functions of Parts
Advertisement
Table of Contents
