NEC R120d-2E User Manual page 121

Chapter 2 Preparations
(1) Installation
This server can be mounted to a rack made by NEC or other companies. Mount the server to a rack in the
following procedure.
Preparation for mounting
•
Checking rails
•
Installing inner and outer rails
Checking inner rails
Make sure the orientation of inner rails.
Installing inner rails
Mount an inner rail marked as "R" to the right side of the server and "L" to the left side when viewed the server
from front.
Align inner rail with three protrusions on side of server
chassis, and slide the inner rail toward rear of the
server.
Make sure the lock at around the center of inner rail
clicks to indicate the rail is surely locked.
Install another inner rail to opposite side in similar way.
Checking outer rails
Make sure the orientation of outer rails by viewing "L" or "R" marked on rail.
Important
Rail for left side has different shape from that for right side.
Make sure the orientation of rails to properly install them.
Inner rail (L)
Outer rail (L)
Express5800/R120d-2E User's Guide
2. Installation and Connection
Inner rail (R)
Outer rail (R)
121