Table of Contents
Advertisement
Chapter 2 Preparations
(4)
Removing rail assemblies
Remove the rail assemblies from the rack by using the following procedure.
Refer to Chapter 2 (2.1.2) - (3) Removal procedure to remove the server from the rack.
1.
2.
Push the unlock lever on outer rail to the
direction shown by arrow to house the
slide rail.
3.
While pressing the lever on outer rail,
push the outer rail toward inside of the
rack, then remove it.
Express5800/R120d-2E User's Guide
2. Installation and Connection
Unlock lever
Locking mechanism
Front View
Rear view
125
Advertisement
Table of Contents
