Pro-Form le Tour de France User Manual page 9

6. Orient the Handlebar (7) as shown.
While a second person holds the Handlebar (7)
near the Handlebar Post (6), connect the Upper
Wire (68) to the Lower Wire (69).
Insert the wires into the Handlebar Post (6).
Tip: Avoid pinching the wires. Attach the
Handlebar (7) to the Handlebar Post (6) with a
5/16" x 3/4" Screw (92) and a 5/16" x 2 1/4"
Screw (81).
7. Tip: Avoid pinching the Extension Wire
(101). The Extension Wire is used only if you
purchase the optional heart rate monitor (see
page 22). If you have purchased the heart rate
monitor, see the instructions included with the
heart rate monitor. If you have not purchased
the heart rate monitor, simply insert the end of
the Extension Wire into the Handlebar (7).
Orient the Handlebar Cover (8) as shown.
Insert a #8 x 3/4" Screw (94) upward into the
front hole in the Handlebar (7). Set the
Handlebar Cover (8) on the Handlebar, and
tighten the Screw into the Handlebar Cover.
Next, insert a #8 x 3/4" Screw (94) into the rear
hole in the Handlebar (7) and tighten the Screw
into the Handlebar Cover (8).
8. Identify the Left Pedal (61), which is marked
with an "L."
Using an adjustable wrench, firmly tighten the
Left Pedal (61) counterclockwise into the Left
Crank Arm (63).
Tighten the Right Pedal (not shown) clockwise
into the Right Crank Arm (not shown).
6
81
7
6
Avoid pinching
the wires
7
8
7
Front
94
Avoid pinching
the wire
8
9
92
68
69
Rear
101
94
63
61