Pro-Form le Tour de France User Manual page 14

HOW TO TURN ON THE POWER
IMPORTANT: If the exercise bike has been
exposed to cold temperatures, allow it to warm to
room temperature before turning on the power. If
you do not do this, you may damage the console
displays or other electrical components.
Plug in the power cord (see
HOW TO PLUG IN THE
POWER CORD on page
11). Next, locate the power
switch on the frame near
the power cord. Press the
power switch to the reset
position.
The display will then light and the console will be
ready for use.
Note: When you turn on the power for the first
time, the incline system will calibrate automati-
cally. The exercise bike will move upward and
downward as it calibrates. When the exercise bike
stops moving, the incline system is calibrated.
IMPORTANT: If the incline system does not cali-
brate automatically, see step 7 on page 22 and
manually calibrate the incline system.
IMPORTANT: The console features a display demo
mode, designed to be used if the exercise bike is
displayed in a store. If the demo mode is turned
on, the console will not turn off and the display
will not be reset when you finish exercising. To
turn off the demo mode, see step 7 on page 20.
HOW TO NAVIGATE THE CONSOLE MENUS
You can use the Home, increase, decrease, and Enter
buttons on the console to navigate through menus in
the display, change settings, and view console
information.
Press the Home button to return to the main menu, to
end a workout, or to return to a previous menu.
Press the increase and decrease buttons to highlight a
menu option.
Press the Enter button to select a menu option or to
confirm a setting.
HOW TO SET UP THE CONSOLE
Before using the exercise bike for the first time, set up
your console.
1. Connect to a wireless network.
Reset
2. Calibrate the incline system.
Position
3. Check for firmware updates.
4. Create an iFit Live account.
5. Begin working out.
14
See steps 1 and 2 on page 19 to connect to a
wireless network. Then, press the Home button to
return to the settings mode.
First, select the maintenance mode (see steps 1
and 2 on page 21). Then, see step 7 on page 22
and calibrate the incline system of the exercise
bike.
First, select the maintenance mode (see steps 1
and 2 on page 21). Then, see step 3 on page 21
and check for firmware updates.
To create an iFit Live account, or for more
information about the account, go to
www.iFit.com.
See HOW TO USE AN IFIT LIVE WORKOUT on
page 18.