Pro-Form le Tour de France User Manual page 10

9. Locate the Upper Wires (68) and the Extension
Wire (101) inside the Handlebar (7).
While a second person holds the Console (9)
near the Handlebar (7), connect the wires on
the Console to the Upper Wires (68). Then,
insert the wires into the Handlebar.
Note: If you have purchased the optional heart
rate monitor, see the instructions included with
the heart rate monitor to connect the Extension
Wire (101). If you have not purchased the heart
rate monitor, simply insert the end of the
Extension Wire into the Console (9).
Tip: Avoid pinching the wires. Slide the
Console (9) onto the Handlebar (7).
Attach the Console (9) with four #8 x 3/4"
Screws (94).
10. Make sure that all parts are properly tightened before you use the exercise bike. Note: After assembly
is completed, some extra parts may be left over. Place a mat beneath the exercise bike to protect the floor.
9
7
9
101
94
Avoid pinching
the wires
10
68