Pro-Form le Tour de France User Manual page 21

HOW TO USE THE MAINTENANCE MODE
The console features a maintenance mode that allows
you to update the console firmware, restore the
default settings, view technical information, perform a
network test, and calibrate the incline.
1. Select the settings mode.
See step 1 on page 19.
2. Select the maintenance mode.
From the settings menu, select Maintenance. The
maintenance menu will appear in the display.
When you select a menu option from the mainte-
nance menu, the top of the display will show
information about the model and version of the
exercise bike.
If the console is connected to the controller of the
exercise bike, the controller dot will be green; if it
is not, the dot will flash.
If the exercise bike is connected to your wireless
network, the network dot will be green; if it is not,
the dot will be black.
3. Update the console firmware.
For the best results, regularly check for
firmware updates.
From the maintenance menu, select Firmware
Update. Press the Enter button to download the
latest firmware for the console.
IMPORTANT: To avoid damaging the exercise
bike, do not turn off the power while the
firmware is being updated.
The display will show the progress of the update.
When the update is complete, the console will turn
off and then turn back on. If it does not, press the
power switch on the exercise bike to the off posi-
tion. Wait for several seconds, and then press the
power switch to the reset position. It may take a
few minutes for the console to be ready for use.
4. Restore the default settings.
From the maintenance menu, select Restore
Defaults. Then, press Enter to restore the console
to the original settings from the factory.
After you restore the default settings, press the
Enter button. The display will return to the mainte-
nance menu.
5. View technical information.
From the maintenance menu, select Technical
Info.
View the total number of hours that the exercise
bike has been used, the total distance that has
been pedaled, and other information.
After you view the information, press the Enter
button. The display will return to the maintenance
menu.
6. Perform a network test.
From the maintenance menu, select Network Test.
The console will run a network test and check the
connection status of the console and the exercise
bike.
After you view the results of the network test,
press the Enter button. The display will return to
the maintenance menu.
21