Advantech RS-200-RPS-D User Manual page 47

Interrupt
Select the IRQ (interrupt request) for the parallel port. Options are
IRQ5 and IRQ7.
Mode
Specify the parallel port mode. Options are Output Only, Bi-directional,
EPP and ECP.
DMA Channel
Specify the DMA channel. Options are DMA1 and DMA3.
Floppy Disk Controller
This setting allows you to assign control of the floppy disk controller.
The options are Enabled (user defined), Disabled and Auto (BIOS
controlled).
Base I/O Address
Select the base I/O address for the parallel port. The options are
Primary and Secondary.
Advanced Chipset Control
Access the submenu to make changes to the following settings.
Clock Spectrum Feature
The options for this setting are Disabled and Extended.
SMART Device Monitoring
The options for this setting are Disabled and Extended.
4-11
Chapter 4: BIOS