Serial Ports; Glan1/2 (Ethernet Ports); Fan Headers; Power Led/Speaker/Nmi Header - Advantech RS-200-RPS-D User Manual

Serial Ports

The COM1 serial port is beside
USB (see Figure 2-3).
table on the right for pin defini-
tions. The COM2 connector is a
header on the motherboard (1-2
for location).

GLAN1/2 (Ethernet Ports)

Two Ethernet ports (designated
GLAN1 and GLAN2) are located
beside the VGA port on the IO
backplane. These ports accept
RJ45 type cables.

Fan Headers

The motherboard has three CPU
and chassis fan headers.
nations include CPU Fan1, CPU
Fan2 and Chassis Fan1. See the
table on the right for pin defini-
tions.
Power LED/Speaker/NMI
On the JDI header, pins 1-3
for a power LED, pins 4-7 are for
the speaker and pins 8-9 are for
the NMI connection. See the table
on the right for speaker pin defini-
tions. Note: The speaker connec-
tor pins are for use with an exter-
nal speaker. If you wish to use
the onboard speaker, you should
close pins 6-7 with a jumper.
Pin Number
1
See the
2
3
4
5
Note: Pin 10 is included on the header but not on
the port.
Desig-
are
2-10
Chapter 2: Installation
Serial Port Pin Definitions
(COM1, COM2)
Definition Pin Number Definition
CD 6
RD 7
TD 8
DTR 9
Ground 10
Fan H eader Pin Definitions
Pin
Number Definition
1 Ground (black)
2 +12V (red)
3 Tachometer
Caution: These fan headers
are D C power.
Speaker Connector Pin
Definitions (JD1)
Pin
Number Function
4 + Red wire, Speaker data
5 Key No connection
6
7 Speaker data
DSR
RTS
CTS
RI
NC
Definition
Key