Clearaudio Ambient User Manual page 9

Place the pulley on the motor spindle. The distance between the pulley and the motor housing
should be approx. 3 mm. Tighten the three little screws inside the pulley with the aluminium
screwdriver provided.
3 mm
Pic. 5: Placing the pulley on the motor spindle
Place now the motorunit beside your Ambient turntable. The distance between the motorunit and
the turntable should be
Pic. 6: Distance between motor unit and Ambient turntable
Seite 9
2 - 2,5 cm!
2 – 2.5 cm
 clearaudio electronic GmbH 2008
Ambient
User manual