Table of Contents
Advertisement
Ambient
User manual
5. Special information
To achieve the full clearaudio warranty, it is necessary that you fill out and send the
corresponding part of the warranty registration card back to clearaudio, within two weeks after
purchase. Only if the product is returned in it's original packing clearaudio can provide the
warranty.
Ambient
Transportation advice: If any transportation of the
-turntable should be necessary,
please always remove the turntable platter. Otherwise serious damage can occur!
The bearing hole needs to be covered as well, to avoid any dust coming into the bearing. Always
take of the pulley of the motor unit as well, to prevent the motor shaft from any damages.
Ambient
If the
-turntable is a longer time not in use, please disconnect the motor from the mains
supply.
Every two years you can lubricate (only if you will recognize speed variations) the bearing of the
turntable platter with the delivered oil. In this case it is enough to put 4 or 5 drops of the oil into
bearing.
Please take special caution to any damages of the power cord. Any damages should only be
repaired only by authorized personal. A damaged power cord must be exchanged immediately!
6. Service
If any service or repair on all clearaudio products is necessary, please contact your dealer /
distributor or contact clearaudio directly. We will inform you about your nearest service location.
PLEASE RETAIN ALL ORIGINAL PACKAGING. You will need it if this unit has to be transported
and/or shipped. Any further questions you may have about this turntable should be directed to
the distributor or directly to clearaudio at
clearaudio electronic GmbH
Spardorfer Str 150
91054 Erlangen
Germany
Tel/Phone: +49-(0)1805/059595
www.clearaudio.de
www.analogshop.de
info@clearaudio.de
Seite 20
clearaudio electronic GmbH 2008
Advertisement
Table of Contents
