Table of Contents
Advertisement
Ambient
User manual
4.2 Satisfy mounting
To mount the tonearm base to the Ambient armboard please use the screws without
nuts (M4x20) and place it like the red marked screws.
Pic. 16: Mounting the tonearm base for Satisfy
Please put careful the cables and the tonearm through the armboard, pay attention that
no wire will be damaged! Now fix the tonearm with the 2 screws ont the right and the
left side, not to much, so that you can adjust it in the next steps!
Pic. 17: Mounting the clearaudio Satisfy tonearm
Seite 16
clearaudio electronic GmbH 2008
Advertisement
Table of Contents
