Extended Parallel Port Header (Jp12); Agp Protection Led (D16); Cpu Overtemperature Led (D14) - Shuttle FN45 User Manual

Extended Parallel Port Header (JP12)

E6
One parallel port header is lo-
cated at the rear panel of the
mainboard. The header is used to
connect the cable attached to a
parallel connector. But the paral-
lel cable and connector are op-
tional at the time of purchase.

AGP Protection LED (D16)

E7
The mainboard provides one
1.5V AGP card which supports up
to 8X. If you plug the 3V AGP
card on the mainboard, the AGP
Protection LED will flash and you
can't turn on the computer.

CPU Overtemperature LED (D14)

E8
When CPU temperature over
85 C, the system will cut off the
0
power supply directly, and the
CPU Overtemperature LED will
flash. You must remove AC
Power and check the CPU and
heatsink are securely fastened
well.
JP12
AGP PROTECTION LED
+
D16
-
CPU OVERTEMP. LED
-
D14
+
- 39 -
1