Shuttle FN45 User Manual page 62

IDE Prefetch Mode
The onboard IDE drive interface support IDE prefetching for faster drive
access. If you install a primary and/or secondary add-on IDE interface,
set this field to Disabled if the interface does not support prefetching.
Ø The Choice: Enabled or Disabled.
IDE HDD Block Mode
Block mode is also called block transfer, multiple commands, or mul-
tiple sector read/write. If your IDE hard drive supports block mode (most
new drivers do), select Enabled for automatic detection of the optimal
number of block read/write per sector the drive can support.
Ø The Choice: Enabled or Disabled.
Onboard PCI Device
Press <Enter> to enter the sub-menu of detailed options.
Init Display First
This item is used to determine initial device when system power on.
Ø The choice: PCI Slot or AGP Slot.
OnChip USB
Do not disable this item if your system has a USB installed on the sys-
tem board and you want to use it.
Ø The choice: Disabled, V1.1+V2.0, or V1.1.
USB Keyboard Support
Select Enabled if your system contains a Universal Serial Bus (USB)
controller and you have a USB keyboard.
Ø The Choice: Enabled or Disabled.
OnChip Audio
This item allows you to control the OnChip Audio.
Ø The Choice: Auto or Disabled.
OnChip Lan
This item allows you to set the OnChip Lan.
Ø The Choice: Auto or Disabled.
OnChip 1394
This item allows you to set the OnChip 1394a.
Ø The Choice: Auto or Disabled.
- 56 -