Front-Panel Connectors Hdd Led Connector (Hled); Green Led/Power Led Connector (Gled/Pwr Led) - Shuttle FN45 User Manual

F
Front-Panel Connectors
HDD LED Connector (HLED)
C1
Attach a connector cable from the IDE device LED to the 2-pin (HLED) header.
The HDD LED lights up whenever an IDE device is active.

Green LED/Power LED Connector (GLED/PWR LED)

C2
This header is dual color LED function. Dual color LED function is defined by
either Green LED or Power LED, the header can be in these states. The Green
LED indicates that the system is currently in one of the power saving mode
(Doze/Standby/Suspend). When the system resumes to normal operation mode,
the Green LED will go off, the Power LED on. The Power LED will go off during
power saving mode. Attach a 2-pin Green LED/Power LED cable to (GLED/
PWR LED) header.
JP10
PWON
+
GLED /
-
-
PWR LED
+
JP10
PWON
+
GLED /
-
-
PWR LED
+
- 30 -
RST
-
+ HLED
1
RST
-
+ HLED
1