Shuttle FN45 User Manual page 6

Test Mode External Frequency
10
11
12
(C) Remedy for the Tested Product & Its EMI Interference:
Remedy: N/A
EMI Interference:
Crystal: 32.768 KHz(Y2)/14.318 MHz(Y3)/12.000 MHz(Y4)/24.576 MHz(Y5)/
Clock Generator: N/A
(D) Supported Host Peripherals:
Host Peripheral
#1
#2
#3 IBM HDD (82.3GB)
#4
SONY CD-ROM
#5
#6 Shuttle AGP Card
(E) Notices for Assembling Computers:
1. Cases should be made of iron or other metal that has good electric conductivity.
2. Cylinders in a case should be made of metal, and as having a mainboard mounted
in a case, make sure screws are all utilized and fastened on a mainboard.
3. An I/O shielding should be contacted with I/O metallic parts of a mainboard.
4. Cables should appropriately be arranged and fixed in a case. Follow instructions:
Ø Leave IDE cables not crossed upon CPU and SDRAM;
Ø Leave power cables minimum in length, and not crossed upon a mainboard;
Ø Leave CPU fan cables minimum in length, and not near CPU;
Ø Leave cables on panels and other spare cables tied in a computer case.
5. Make sure an EMI shielding attached to a case has properly been installed.
6. Make sure a 5.25" or 3.5" FDD and screws are fastened to an EMI shielding.
7. Make sure a case is closely in contact with EMI connected points.
8. Make sure there is no cleft in a case which is not deformed.
9. Make sure a PCI or AGP door is bound to a case.
10. Make sure cables of other devices (fans or some others) are fixed in a case.
100 MHz
100 MHz
100 MHz
25.000 MHz(Y6)/24.576 MHz(X7)
Product Name
Case
Power Supply
(switchable)
IC35L080AVVA07-0
MITSUMI FDD
Player
CV22 (registered no.: D33032)
CPU
Athlon 1.4 GHz
Duron 1.2 GHz
Duron 1.2 GHz
Model Name
SN41G2
ENP-2320
(Enhanced)
D353M3
CDU4811
Case Open/Closed
Open
Closed
Open
S/N FCC ID
N/A
A4DEENPG 3902I082
3892A291