Figure 2.2:Device Name Listed On Device Manager - Advantech PCI-1752U User Manual

Step 9: Replace the cover of your computer chassis. Re-connect the
cables you removed in step 2.
Step10: Plug in the power cord and turn on the computer .
Note: In case you installed the card without installing the DLL driver
first, Windows XP/2000 will recognize your card as an "unknown
device" after reboot, and will prompt you to provide necessary driver.
You should ignore the prompting messages (just click the Cancel but-
ton) and set up the driver according to the steps described in Section
2.2 Driver Installation.
After the PCI-1752U/PCI-1752USO card is installed, you can verify
whether it is properly installed on your system in the Device Manager:
1. Access the Device Manager through Control Panel/System/Device
Manager.
2. The device name of the PCI-1752U/PCI-1752USO should be listed
on the Device Manager tab on the System Property Page.
Figure 2.2: Device name listed on Device Manager
11 Chapter 2