Using The Lpr Port; Installing The Postscript 3 Printer Driver (Windows 2000) - Ricoh 3045 Facsimile Reference Manual

Windows Configuration

Using the LPR Port

Installing the PostScript 3 Printer Driver (Windows 2000)

1
Important
❒ Installing this printer driver requires Administrators permission. Log on us-
ing an account that has Administrators permission.
A
Quit all applications currently running.
B
Insert the CD-ROM into the CD-ROM drive.
The installer starts.
C
Select an interface language, and then click [OK].
The default interface language is English.
The printer driver with the selected language will be installed. The English
printer driver is installed when the following language is selected: Cestina,
Magyar, Polski, Portugues, Suomi.
D
Click [PostScript 3 Printer Driver].
Add Printer Wizard starts.
E
Click [Next >].
F
Click [Local printer], and then click [Next >].
G
Click [Create a new port:].
H
Click [LPR Port], and then click [Next >].
I
Enter the printer's IP address in the [Name or address of server providing lpd]
box.
J
Enter "lp" in the [Name of printer or print queue on that server] box, and then click
[OK].
K
Check that the name of the machine whose driver you want to install is se-
lected, and then click [Next >].
L
Change the printer name if you want, and then click [Next >].
Select the [Yes] check box to configure the printer as default.
M
Click [Next >].
N
Specify whether or not to print a test page, and then click [Next >].
O
Click [Finish].
The printer driver installation starts.
20