Advanced Features; Setting Sub Codes For Transmission - Ricoh 3045 Facsimile Reference Manual

Transmission

Advanced Features

This section describes how to specify a destination using advanced features.
1

Setting SUB Codes for Transmission

Follow these steps to send a document with a SUB Code as a confidential transmission.
Normally you can only use Confidential Transmission to send documents to fax
machines of the same manufacturer that have the Confidential Reception func-
tion. However, if the other machine supports a similar function called "SUB
Code", you can send fax documents to the other party using this method instead.
For details about the SUB Code, see "Box Settings" in "Facsimile Features", General Settings Guide.
Important
❒ A SUB Code cannot be used with Internet Fax.
A
Place the original, and then select the scan settings you require.
B
Enter the fax number of a destination or an IP-Fax destination.
C
Press [Adv. Features].
D
Press [SUB Code].
E
Press [TX SUB Code].
F
Enter a SUB Code, and then press [OK].
If you make a mistake, press [Clear] or the {Clear/Stop} key before pressing
[OK], and then try again.
"SUB Code" appears one line above [Adv. Features] on the display.
94