Ricoh 3045 Facsimile Reference Manual page 728

Monitoring and Configuring the Printer
Memory Low: Fax Scanning
Memory Low: Scanning
Miscellaneous Error
Mismatch: Paper Size
2
Mismatch: Paper Size and Type
Mismatch: Paper Type
Near Replacing: Black PCU
Near Replacing: Develop. Unit K
Near Replacing: Fusing Unit
Nearly Full: Waste Toner
Need more Staples
No Paper: Interposer Tray
No Paper: Selected Tray
No Paper: Tray 1
No Paper: Tray 2
No Paper: Tray 3
No Paper: Tray 3 (LCT)
No Paper: Tray 4
Not Detected: B2 Lever
Not Detected: Black Toner
Not Detected: Develop. Unit (K)
Not Detected: Duplex Feed Unit
Not Detected: Duplex Unit
Not Detected: Finisher
Not Detected: Fusing Unit
Not Detected: Input Tray
Not Detected: Interposer
Not Detected: PCU
Not Detected: PCU (K)
Not Detected: Tray 1
Not Detected: Tray 2
Not Detected: Tray 3
90
Messages Description
Memory shortage has occurred while transmitting the
fax.
Memory shortage has occurred while the scanner was
working.
Other error has occurred.
Indicated paper tray does not contain paper of select-
ed size.
Indicated paper tray does not contain paper of select-
ed size and type.
Indicated paper tray does not contain paper of select-
ed type.
Prepare the new black photoconductor unit.
Prepare the new development unit (black).
Prepare the new fusing unit.
Waste toner bottle is nearly full.
Stapler has almost run out of staples.
There is no paper in interposer unit.
There is no paper in specified tray.
There is no paper in tray 1.
There is no paper in tray 2.
There is no paper in tray 3.
There is no paper in tray 3 (Large Capacity tray).
There is no paper in tray 4.
B2 lever is not correctly set.
Black toner is not correctly set.
The development unit (black) is not correctly set.
The duplex unit is not correctly set.
The duplex feed unit is not correctly set.
Finisher is not correctly set.
The fusing unit is not correctly set.
The paper feed tray is not correctly set.
Interposer unit is not correctly set.
The photoconductor unit is not correctly set.
The photoconductor unit (black) is not correctly set.
Tray 1 is not correctly set.
Tray 2 is not correctly set.
Tray 3 is not correctly set.