Replacing Processors; Preliminary Steps - Fujitsu PRIMERGY CX272 S1 Upgrade And Maintenance Manual

8.2

Replacing processors

Field Replaceable Unit
(FRU)
Tools: Phillips PH2 / (+) No. 2 screw driver
V
CAUTION!
Processors are extremely sensitive to electrostatic discharge and must
be handled with care. After a processor has been removed from its
protective sleeve or from its socket, place it upside down on a
nonconducting, antistatic surface. Never push a processor over a
surface.
8.2.1

Preliminary steps

Before upgrading or replacing the processor, perform the following steps:
"Disabling SVOM boot watchdog functionality" on page 75
Ê
"Shutting down the server node" on page 41
Ê
"Removing the server node from the Dual Node Cluster Server" on page 42
Ê
"Removing the air duct" on page 44
Ê
"Removing the air duct brackets" on page 43
Ê
CX272 S1
Upgrade and Maintenance Manual
Hardware: 15 minutes
Software: 5 minutes
Processors
159