Installing The Slot Bracket; Concluding Steps - Fujitsu PRIMERGY CX272 S1 Upgrade And Maintenance Manual

6.3.2.3

Installing the slot bracket

V
CAUTION!
Always replace slot brackets into the unused PCI slot openings to comply
with applicable EMC regulations and satisfy cooling requirements.
Figure 65: Installing the slot bracket
Ê Install the slot bracket (1).
Ê Secure the slot bracket with the screw (2).
Screw type: 6-32 x 4.7 mm
6.3.2.4

Concluding steps

Perform the following steps:
"Installing SAS RAID controller" on page 124
Ê
"Installing the riser module" on page 70
Ê
"Installing the server node in the Dual Node Cluster Server" on page 72
Ê
"Switching on the server node" on page 73
Ê
CX272 S1
Upgrade and Maintenance Manual
Expansion cards
(if applicable)
119