Fujitsu PRIMERGY CX272 S1 Upgrade And Maintenance Manual page 207

Figure 124: Opening the load plate (B)
Ê Fully open the load plate.
V
CAUTION!
Be careful not to touch or bend the spring contacts on the processor
socket.
Ê Make sure that the load plate is in the fully open position.
Ê Use a magnifying glass (recommended) to inspect the socket spring
contacts for damages from different angles. Do not use the spare system
board if any irregularities are visible. Possible damages:
– Contact spring is bent backwards upon itself
– Contact spring tip position is shifted or out of alignment
CX272 S1
Upgrade and Maintenance Manual
System board and components
207