Replacing Processors - Fujitsu PRIMERGY BX630 S2 Service Supplement Manual

Replacement Routines
4.3

Replacing processors

You can install one or two AMD Opteron MP processors in the basic module of
the server blade, see
V
ATTENTION!
Always use processors of the same type. All processors must have
the same frequency and cache size. For multi-processor mode use a
suitable multi-processor operating system.
Never touch the processor core.
The thermal paste must be intact for mounting the processor.
Never install a processor without a heat sink! The processor is likely
to overheat, which may cause damage to the processor and the
system board.
Requirements
– The server blade has been removed
– The cover of the server blade has been removed
BX630 S2
"Spare Parts and Add-On Modules" on page
Service Supplement
Replacing processors
38.
23