Wifi - Multitech MultiConnect rCell MTR-H5 Developer's Manual

4 COMMANDS AND COLLECTIONS
Element Type Description
name STRING name of user
password STRING password hash
permission STRING permission level : ADMIN, USER, GUEST
4.3.27 wifi
Description: settings for wi-fi services : OBJECT
Element Type
ap OBJECT
beaconInterval UINT
channel STRING
countryCode STRING
dtimInterval UINT
enabled BOOL
networkMode STRING
rtsThreshold UINT
security OBJECT
algorithm STRING
mode STRING
psk STRING
ssid STRING
client OBJECT
enabled BOOL
mode STRING
savedNetworks ARRAY
enabled BOOL
name STRING
security OBJECT
algorithm STRING
mode STRING
password STRING
psk STRING
username STRING
ssid STRING
wpaConfig OBJECT
networks ARRAY
Multi-Tech Systems, Inc. MultiConnect
Description
wi-fi access point settings
time in msec between beacon frames (default:100)
wireless channel to use. Valid entries are 1-14 depending on country code or
AUTO (default:AUTO)
two character operating country code
frames between delivery traffic indication messages for buffered multicast/broad-
cast data (default:1)
enable or disable the wifi access point (default:false)
access point radio mode of operation. Valid entries are b, n, bg or bgn (de-
fault:bgn)
request to send threshold (default:2347)
wi-fi access point security settings
algorithm to use with WPA modes. Valid entries are TKIP, AES or TKIP+AES
(default:TKIP+AES)
security mode for access point. Valid entries are NONE, WEP, WPA-PSK or
WPA2-PSK (default:NONE)
pre-shared key for client authentication
network SSID, may only contain alpha-numeric characters and symbols not in-
cluding ?, ", $, [, , ] and + characters
wi-fi client settings
enable or disable the wifi client (default:false)
use the wifi interface as a WAN or LAN (default:WAN)
list of network wi-fi client will use to find a connection
enable or disable saved network when trying to connect
name of network
wi-fi client security settings
algorithm to use with WPA modes. Valid entries are TKIP, AES or TKIP+AES
(default:TKIP+AES)
security mode (default:NONE)
password used to connect to network
pre-shared key to connect to network
username used to connect to network
ssid of network
settings gathered from wi-fi scan
list of networks from last wifi scan
R
rCell API Developer Guide
27