Ipsectunnels - Multitech MultiConnect rCell MTR-H5 Developer's Manual

4 COMMANDS AND COLLECTIONS
Element Type
activation STRING
description STRING
enabled BOOL
ip STRING
mode STRING
name STRING
port UINT
protocol STRING
secondaryIp STRING
secondaryPort STRING
sequence STRING
source STRING
termination STRING
timeoutSeconds UINT
type STRING
4.3.14

ipsecTunnels

Description: array of IPsec tunnels : ARRAY
Multi-Tech Systems, Inc. MultiConnect
Description
signal to start connection
summary of the pipe
enable or disable this pipe
ip address of the remote end of the pipe
determines whether local end point is a client or server or both
label of the pipe
port number of the remote end point when in CLIENT mode, or listening port
when in SERVER mode
the internet protocol to use (UDP or TCP)
ip address of the second server to try if a connection can not be made to the
first. Requires CLIENT mode
port of the second server to try if a connection can not be made to the first.
Requires CLIENT mode
the character or stream of characters that signal the pipe to terminate. Requires
termination mode to be SEQUENCE
the source defines the local device to convert data to and from ip communication
the mode for terminating the pipe
the amount of seconds of inactivity allowed before the pipe will close. Requires
termination mode to be TIMEOUT
the type of pipe. currently only serial-to-ip and bluetooth-to-ip are supported
R
rCell API Developer Guide
19