Setting Up Wi-Fi And Gps; Resetting The Device; Resetting The Device To Factory Defaults - Multitech MultiConnect rCell 100 Series User Manual

Hide thumbs Also See for MultiConnect rCell 100 Series:

Table of Contents

Setting up Wi-Fi and GPS

Some models have Wi-Fi capability. If your device supports this feature, you need use the device's web

management interface to enable Wi-Fi. Then, see the online help file for information on working with Wi-Fi.

If your model can support a GPS, also see the online help file for information on working with a GPS.

To reset the device, when desired:

Find the hole in the panel labeled RESET. The reset button is recessed into the case.

To access the reset button, find a pin or similar thin object that can fit through the reset hole.

Use the pin to quickly press the reset button. Press the button until the Status Light goes out.

Release the pin from the reset button.

The device reboots.

You can reset the device so that custom configuration settings are cleared and replaced with default

configuration settings. Default settings can include OEM specific settings.

To reset the device to factory default settings, press the reset button for about 3 seconds, or until all LEDs

turn off. The device reboots.

MultiConnect rCell 100 Series User Guide

Table of Contents

Do you have a question about the MultiConnect rCell 100 Series and is the answer not in the manual?

Multiconnect rcell mtr-h6