Adjusting The Flip Back Armrest Height - Invacare Pronto M50 Service Manual
Invacare pronto series power wheelchair service manual
Hide thumbs
Also See for Pronto M50:
- Parts catalog (100 pages) ,
- Owner's manual (96 pages) ,
- Brochure & specs (2 pages)
Table of Contents
Advertisement
SECTION 5—ARMS
Adjusting the Flip Back Armrest Height
Make sure the flip back armrest release levers and height adjustment levers are in
the locked position before using the wheelchair.
NOTE: For this procedure, refer to FIGURE 5.5.
1. Unlock top of flip back armrest by pulling height adjustment lever into the up
(horizontal) position.
2. Adjust top of the flip back armrest to the desired height.
3. Lock top of flip back armrest by pushing height adjustment lever into the down
(vertical) position.
4. Lift up on flip back armrest to make sure the armrest is locked in place.
5. Repeat STEPS 1-4 for opposite flip back armrest, if necessary.
Height
Adjustment
Lever
Flip Back
Armrest
Front Arm Socket
FIGURE 5.5 Adjusting the Flip Back Armrest Height
Pronto® Series
WARNING
Flip Back Armrest
Release Lever
48
Locked
(Down - Vertical)
Unlocked
(Up - Horizontal)
Part No. 1125075
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
